Online Microphone Test
Test your microphone online by recording a short sample and playing it back to hear how your voice sounds. Allow microphone access to check whether your browser detects your mic and receives sound.
No accountMedia stays on your device
Microphone Test
Allow microphone access, speak normally, and confirm that your browser receives sound. You can record a short local sample, play it back, switch input devices, and inspect browser-reported settings.
Status
Select Start test and allow microphone permission.
—Input level
—dBFS
—Sample rate
—Channels
—Echo cancellation
—Noise suppression
—Auto gain
—Track latency*
What this test checks
- Whether the browser can open a microphone
- Whether an audio signal reaches the page
- Relative input level and dBFS signal level
- Local recording and playback when MediaRecorder is supported
- Browser-reported sample rate, channels and processing settings
How this test works
- Select Start test and allow microphone permission.
- Speak at a normal distance and watch the level meter and waveform.
- Record a short sample and play it back if you want to verify the full browser input path.
- If the result fails, use the error message before changing operating-system settings.
If the test does not behave as expected
- No microphone input: If an input device is listed but no clear signal is detected, verify the physical connection or mute switch and confirm that the intended input is selected in the operating system and browser. If only background noise moves the meter, switch input devices or check the operating-system input level before treating the device as working.
- Permission blocked or recording unavailable: If permission is blocked, restore microphone permission for this site and start the test again. If live input works but recording is unavailable, the browser may not expose MediaRecorder for a local playback sample.
- Recording finished, but playback is silent: Check the playback volume and make sure the player, browser tab and system output are not muted. Play a known audible clip in the same browser and check the selected speakers or headphones in your system sound settings, including any separate output or volume setting for the browser. If the other clip is audible, watch the input meter while speaking and record a fresh sample. If the other clip is silent too, check the output path first.
Note: This test cannot measure calibrated room sound pressure (dB SPL) or prove a physical microphone fault. It reports what the browser can observe.
Related tests
Troubleshoot a microphone that is not working · Check microphone permission in Chrome
Privacy by design
The core test runs in your browser. Audio and video used by the test are not uploaded by the test engine.